php-beanstalkd消息队列类实例分享

php  /  管理员 发布于 7年前   239

本文实例为大家分享了php beanstalkd消息队列类的具体代码，供大家参考，具体内容如下

 true,      'host' => '127.0.0.1',      'port' => 11300,      'timeout' => 1,      'logger' => null    ];    $this->_config = $config + $defaults;  }   /**   * Destructor, disconnects from the server.   *   * @return void   */  public function __destruct() {    $this->disconnect();  }   /**   * Initiates a socket connection to the beanstalk server. The resulting   * stream will not have any timeout set on it. Which means it can wait   * an unlimited amount of time until a packet becomes available. This   * is required for doing blocking reads.   *   * @see \Beanstalk\Client::$_connection   * @see \Beanstalk\Client::reserve()   * @return boolean `true` if the connection was established, `false` otherwise.   */  public function connect() {    if (isset($this->_connection)) {      $this->disconnect();    }    $errNum = '';    $errStr = '';    $function = $this->_config['persistent'] ? 'pfsockopen' : 'fsockopen';    $params = [$this->_config['host'], $this->_config['port'], &$errNum, &$errStr];     if ($this->_config['timeout']) {      $params[] = $this->_config['timeout'];    }    $this->_connection = @call_user_func_array($function, $params);     if (!empty($errNum) || !empty($errStr)) {      $this->_error("{$errNum}: {$errStr}");    }     $this->connected = is_resource($this->_connection);     if ($this->connected) {      stream_set_timeout($this->_connection, -1);    }    return $this->connected;  }   /**   * Closes the connection to the beanstalk server by first signaling   * that we want to quit then actually closing the socket connection.   *   * @return boolean `true` if diconnecting was successful.   */  public function disconnect() {    if (!is_resource($this->_connection)) {      $this->connected = false;    } else {      $this->_write('quit');      $this->connected = !fclose($this->_connection);       if (!$this->connected) {        $this->_connection = null;      }    }    return !$this->connected;  }   /**   * Pushes an error message to the logger, when one is configured.   *   * @param string $message The error message.   * @return void   */  protected function _error($message) {    if ($this->_config['logger']) {      $this->_config['logger']->error($message);    }  }   public function errors()  {    return $this->_config['logger'];  }  /**   * Writes a packet to the socket. Prior to writing to the socket will   * check for availability of the connection.   *   * @param string $data   * @return integer|boolean number of written bytes or `false` on error.   */  protected function _write($data) {    if (!$this->connected) {      $message = 'No connecting found while writing data to socket.';      throw new RuntimeException($message);    }     $data .= "\r\n";    return fwrite($this->_connection, $data, strlen($data));  }   /**   * Reads a packet from the socket. Prior to reading from the socket   * will check for availability of the connection.   *   * @param integer $length Number of bytes to read.   * @return string|boolean Data or `false` on error.   */  protected function _read($length = null) {    if (!$this->connected) {      $message = 'No connection found while reading data from socket.';      throw new RuntimeException($message);    }    if ($length) {      if (feof($this->_connection)) {        return false;      }      $data = stream_get_contents($this->_connection, $length + 2);      $meta = stream_get_meta_data($this->_connection);       if ($meta['timed_out']) {        $message = 'Connection timed out while reading data from socket.';        throw new RuntimeException($message);      }      $packet = rtrim($data, "\r\n");    } else {      $packet = stream_get_line($this->_connection, 16384, "\r\n");    }    return $packet;  }   /* Producer Commands */   /**   * The `put` command is for any process that wants to insert a job into the queue.   *   * @param integer $pri Jobs with smaller priority values will be scheduled   *    before jobs with larger priorities. The most urgent priority is   *    0; the least urgent priority is 4294967295.   * @param integer $delay Seconds to wait before putting the job in the   *    ready queue. The job will be in the "delayed" state during this time.   * @param integer $ttr Time to run - Number of seconds to allow a worker to   *    run this job. The minimum ttr is 1.   * @param string $data The job body.   * @return integer|boolean `false` on error otherwise an integer indicating   *     the job id.   */  public function put($pri, $delay, $ttr, $data) {    $this->_write(sprintf("put %d %d %d %d\r\n%s", $pri, $delay, $ttr, strlen($data), $data));    $status = strtok($this->_read(), ' ');     switch ($status) {      case 'INSERTED':      case 'BURIED':        return (integer) strtok(' '); // job id      case 'EXPECTED_CRLF':      case 'JOB_TOO_BIG':      default:        $this->_error($status);        return false;    }  }   /**   * The `use` command is for producers. Subsequent put commands will put   * jobs into the tube specified by this command. If no use command has   * been issued, jobs will be put into the tube named `default`.   *   * @param string $tube A name at most 200 bytes. It specifies the tube to   *    use. If the tube does not exist, it will be created.   * @return string|boolean `false` on error otherwise the name of the tube.   */  public function useTube($tube) {    $this->_write(sprintf('use %s', $tube));    $status = strtok($this->_read(), ' ');     switch ($status) {      case 'USING':        return strtok(' ');      default:        $this->_error($status);        return false;    }  }   /**   * Pause a tube delaying any new job in it being reserved for a given time.   *   * @param string $tube The name of the tube to pause.   * @param integer $delay Number of seconds to wait before reserving any more   *    jobs from the queue.   * @return boolean `false` on error otherwise `true`.   */  public function pauseTube($tube, $delay) {    $this->_write(sprintf('pause-tube %s %d', $tube, $delay));    $status = strtok($this->_read(), ' ');     switch ($status) {      case 'PAUSED':        return true;      case 'NOT_FOUND':      default:        $this->_error($status);        return false;    }  }   /* Worker Commands */   /**   * Reserve a job (with a timeout).   *   * @param integer $timeout If given specifies number of seconds to wait for   *    a job. `0` returns immediately.   * @return array|false `false` on error otherwise an array holding job id   *     and body.   */  public function reserve($timeout = null) {    if (isset($timeout)) {      $this->_write(sprintf('reserve-with-timeout %d', $timeout));    } else {      $this->_write('reserve');    }    $status = strtok($this->_read(), ' ');     switch ($status) {      case 'RESERVED':        return [          'id' => (integer) strtok(' '),          'body' => $this->_read((integer) strtok(' '))        ];      case 'DEADLINE_SOON':      case 'TIMED_OUT':      default:        $this->_error($status);        return false;    }  }   /**   * Removes a job from the server entirely.   *   * @param integer $id The id of the job.   * @return boolean `false` on error, `true` on success.   */  public function delete($id) {    $this->_write(sprintf('delete %d', $id));    $status = $this->_read();     switch ($status) {      case 'DELETED':        return true;      case 'NOT_FOUND':      default:        $this->_error($status);        return false;    }  }   /**   * Puts a reserved job back into the ready queue.   *   * @param integer $id The id of the job.   * @param integer $pri Priority to assign to the job.   * @param integer $delay Number of seconds to wait before putting the job in the ready queue.   * @return boolean `false` on error, `true` on success.   */  public function release($id, $pri, $delay) {    $this->_write(sprintf('release %d %d %d', $id, $pri, $delay));    $status = $this->_read();     switch ($status) {      case 'RELEASED':      case 'BURIED':        return true;      case 'NOT_FOUND':      default:        $this->_error($status);        return false;    }  }   /**   * Puts a job into the `buried` state Buried jobs are put into a FIFO   * linked list and will not be touched until a client kicks them.   *   * @param integer $id The id of the job.   * @param integer $pri *New* priority to assign to the job.   * @return boolean `false` on error, `true` on success.   */  public function bury($id, $pri) {    $this->_write(sprintf('bury %d %d', $id, $pri));    $status = $this->_read();     switch ($status) {      case 'BURIED':        return true;      case 'NOT_FOUND':      default:        $this->_error($status);        return false;    }  }   /**   * Allows a worker to request more time to work on a job.   *   * @param integer $id The id of the job.   * @return boolean `false` on error, `true` on success.   */  public function touch($id) {    $this->_write(sprintf('touch %d', $id));    $status = $this->_read();     switch ($status) {      case 'TOUCHED':        return true;      case 'NOT_TOUCHED':      default:        $this->_error($status);        return false;    }  }   /**   * Adds the named tube to the watch list for the current connection.   *   * @param string $tube Name of tube to watch.   * @return integer|boolean `false` on error otherwise number of tubes in watch list.   */  public function watch($tube) {    $this->_write(sprintf('watch %s', $tube));    $status = strtok($this->_read(), ' ');     switch ($status) {      case 'WATCHING':        return (integer) strtok(' ');      default:        $this->_error($status);        return false;    }  }   /**   * Remove the named tube from the watch list.   *   * @param string $tube Name of tube to ignore.   * @return integer|boolean `false` on error otherwise number of tubes in watch list.   */  public function ignore($tube) {    $this->_write(sprintf('ignore %s', $tube));    $status = strtok($this->_read(), ' ');     switch ($status) {      case 'WATCHING':        return (integer) strtok(' ');      case 'NOT_IGNORED':      default:        $this->_error($status);        return false;    }  }   /* Other Commands */   /**   * Inspect a job by its id.   *   * @param integer $id The id of the job.   * @return string|boolean `false` on error otherwise the body of the job.   */  public function peek($id) {    $this->_write(sprintf('peek %d', $id));    return $this->_peekRead();  }   /**   * Inspect the next ready job.   *   * @return string|boolean `false` on error otherwise the body of the job.   */  public function peekReady() {    $this->_write('peek-ready');    return $this->_peekRead();  }   /**   * Inspect the job with the shortest delay left.   *   * @return string|boolean `false` on error otherwise the body of the job.   */  public function peekDelayed() {    $this->_write('peek-delayed');    return $this->_peekRead();  }   /**   * Inspect the next job in the list of buried jobs.   *   * @return string|boolean `false` on error otherwise the body of the job.   */  public function peekBuried() {    $this->_write('peek-buried');    return $this->_peekRead();  }   /**   * Handles response for all peek methods.   *   * @return string|boolean `false` on error otherwise the body of the job.   */  protected function _peekRead() {    $status = strtok($this->_read(), ' ');     switch ($status) {      case 'FOUND':        return [          'id' => (integer) strtok(' '),          'body' => $this->_read((integer) strtok(' '))        ];      case 'NOT_FOUND':      default:        $this->_error($status);        return false;    }  }   /**   * Moves jobs into the ready queue (applies to the current tube).   *   * If there are buried jobs those get kicked only otherwise delayed   * jobs get kicked.   *   * @param integer $bound Upper bound on the number of jobs to kick.   * @return integer|boolean False on error otherwise number of jobs kicked.   */  public function kick($bound) {    $this->_write(sprintf('kick %d', $bound));    $status = strtok($this->_read(), ' ');     switch ($status) {      case 'KICKED':        return (integer) strtok(' ');      default:        $this->_error($status);        return false;    }  }   /**   * This is a variant of the kick command that operates with a single   * job identified by its job id. If the given job id exists and is in a   * buried or delayed state, it will be moved to the ready queue of the   * the same tube where it currently belongs.   *   * @param integer $id The job id.   * @return boolean `false` on error `true` otherwise.   */  public function kickJob($id) {    $this->_write(sprintf('kick-job %d', $id));    $status = strtok($this->_read(), ' ');     switch ($status) {      case 'KICKED':        return true;      case 'NOT_FOUND':      default:        $this->_error($status);        return false;    }  }   /* Stats Commands */   /**   * Gives statistical information about the specified job if it exists.   *   * @param integer $id The job id.   * @return string|boolean `false` on error otherwise a string with a yaml formatted dictionary.   */  public function statsJob($id) {    $this->_write(sprintf('stats-job %d', $id));    return $this->_statsRead();  }   /**   * Gives statistical information about the specified tube if it exists.   *   * @param string $tube Name of the tube.   * @return string|boolean `false` on error otherwise a string with a yaml formatted dictionary.   */  public function statsTube($tube) {    $this->_write(sprintf('stats-tube %s', $tube));    return $this->_statsRead();  }   /**   * Gives statistical information about the system as a whole.   *   * @return string|boolean `false` on error otherwise a string with a yaml formatted dictionary.   */  public function stats() {    $this->_write('stats');    return $this->_statsRead();  }   /**   * Returns a list of all existing tubes.   *   * @return string|boolean `false` on error otherwise a string with a yaml formatted list.   */  public function listTubes() {    $this->_write('list-tubes');    return $this->_statsRead();  }   /**   * Returns the tube currently being used by the producer.   *   * @return string|boolean `false` on error otherwise a string with the name of the tube.   */  public function listTubeUsed() {    $this->_write('list-tube-used');    $status = strtok($this->_read(), ' ');     switch ($status) {      case 'USING':        return strtok(' ');      default:        $this->_error($status);        return false;    }  }   /**   * Returns a list of tubes currently being watched by the worker.   *   * @return string|boolean `false` on error otherwise a string with a yaml formatted list.   */  public function listTubesWatched() {    $this->_write('list-tubes-watched');    return $this->_statsRead();  }   /**   * Handles responses for all stat methods.   *   * @param boolean $decode Whether to decode data before returning it or not. Default is `true`.   * @return array|string|boolean `false` on error otherwise statistical data.   */  protected function _statsRead($decode = true) {    $status = strtok($this->_read(), ' ');     switch ($status) {      case 'OK':        $data = $this->_read((integer) strtok(' '));        return $decode ? $this->_decode($data) : $data;      default:        $this->_error($status);        return false;    }  }   /**   * Decodes YAML data. This is a super naive decoder which just works on   * a subset of YAML which is commonly returned by beanstalk.   *   * @param string $data The data in YAML format, can be either a list or a dictionary.   * @return array An (associative) array of the converted data.   */  protected function _decode($data) {    $data = array_slice(explode("\n", $data), 1);    $result = [];     foreach ($data as $key => $value) {      if ($value[0] === '-') {        $value = ltrim($value, '- ');      } elseif (strpos($value, ':') !== false) {        list($key, $value) = explode(':', $value);        $value = ltrim($value, ' ');      }      if (is_numeric($value)) {        $value = (integer) $value == $value ? (integer) $value : (float) $value;      }      $result[$key] = $value;    }    return $result;  }} ?>

以上就是本文的全部内容，希望对大家的学习有所帮助，也希望大家多多支持。

您可能感兴趣的文章:

• PHP的Laravel框架中使用消息队列queue及异步队列的方法
• PHP+memcache实现消息队列案例分享
• PHP下操作Linux消息队列完成进程间通信的方法
• PHP使用php-resque库配合Redis实现MQ消息队列的教程
• php+redis消息队列实现抢购功能
• PHP消息队列用法实例分析
• PHP+RabbitMQ实现消息队列的完整代码
• PHP+MySQL实现消息队列的方法分析
• php基于Redis消息队列实现的消息推送的方法
• PHP基于Redis消息队列实现发布微博的方法
• PHP Beanstalkd消息队列的安装与使用方法实例详解